Lever Actuated Hydraulic Directional Flow Control Valveĥ' bore, 8' or 12' stroke ram, produces 26 tonnes of force at 3000 psiĤ5 Liter oil tank, size 600 mm(end of the bracket to end of bracket), 375 mm wide and 300 mm high Screw on 10 micron Oil Return Filter and Aluminium Filter head Simply adjust with an Allen key up to 3000 psi for maximum tonnage.īell housing, shaft couplers & a cast iron hydraulic Hi Lo pump Please note The pressure relief on the directional flow control valve is factory set to 2200 psi. You must also have a 20 amp fused / circuit to run this unit. Running the pump in the wrong direction will blow its seals. Whilst standing behind the motor, please ensure the fan turns clockwise. It is very important to test the rotation before fitting the pump. There is a wiring diagram under the lid, but by law, an electrician is supposed to fit this. Please note, you will need to fit an electric cord into the motor. The electric motor needs to be wired and you must use a licensed electrician. You will need to assemble the parts and design and build your own frame.

It can produce a maximum of 26 tonnes of force, with a good speed (see video of actual unit). Just about all the hydraulic hardware, you will need to build your own metal forge. This setup gives you the maximum speed & tonnage we can provide for 240 volts.

The 3.7 kW motor & hi-lo pump are the maximum power you can run on 240 volts Single Phase. This 240 volt, 3.7Kw metal forge hardware package. Kit Includes Electric Motor, Automatic Hi-Lo Pump, 25 Ton Big bore Cylinder, Oil Tank, Oil Filter, Lever actuated Direction Control Valve, High and Low-Pressure Hoses, DIY Hose Fittings, and even a Stainless Steel Pressure Gauge Metal Forging Complete Hydraulic Press KIT for 240 Volt Single Phase, Home or garage installation.Īll the Hydraulic Parts you will need to build your own Hydraulic Metal Forging Press

Hydraulic forging press for sale